Purpose of products
Protective structures of TM "ENTEXSY" are various systems - blinds, curtains, shields, gratings for full or partial coverage of the area of inspection ditches, pits, cellars and other technical openings located in the floor, which significantly reduce the risk of injuries and allow you to increase the usable area of the room.
Depending on the model they allow you bypass the pits or move tool carts (jacks, stands, lifts, couches, etc.) with a load of 1,000 kg, 1,500 kg and 5,000 kg per square meter without jumping over ditches (pits) closed by protective structures.
TM "ENTEXSY" coating systems can be adapted to any existing inspection ditch or other technical openings in the floor. If it is necessary to open fully the viewing ditch, it is possible to remove the structure assembled (in the case of using protective curtains or shields), which allows you to move it easily to another place for storage.
Protective structures are delivered assembled, as they say "all in one box". Installation time, depending on the model, takes about 3 hours.
We provide technical support, service, staff training and guarantee on our products for 24 months.
Safety of employees
Simplicity of operation
Reliability of structures
Durability of products
Our clients
The main customers of TM "ENTEXSY" products are automobile companies, service stations (ST) for cars and trucks, transport companies, enterprises with their own fleet and maintenance, manufacturing enterprises, workshops, warehouses, the owners of private houses and garages, etc.
Our advantages
Computer modeling of each product – calculation of relevant elements on specialized software
Engineering design with the optimal ratio — strength / light weigh / cost
The simplest repairable design
Is delivered assembled (in one box)
Flexible production is the possibility of introducing changes into the design of the product for special tasks, manufacturing additional accessories
Timely delivery of products, technical support and training of staff
Warranty and post-warranty service
The price of our products is much lower than the analogues on the market because the structure is manufactured directly by our company
«Pit Cover» (narrow slat)
Protective structure for covering inspection ditches (pits and other technical openings)
Characteristics and description:
- The length of the protective covering for the ditch (pit) is up to 20 m
- The length of tandem covering for the ditch (pit) is up to 40 m
- The width of covering is up to 1300 mm
- Minimum depth of the ditch (pit) is up to 1200 mm
- The maximum force of pushing out a slat is 210 kg
- The maximum angle of the slope of guide bars is 3º
- Supply voltage is 220V, 380V or pneumatic drive
Warning! The pneumatic drive is quiet. It is especially safe for service stations that service cars with gas cylinder equipment. Does not require electricity.
Permissible load on one slat:
For model “Alu”
150 kg (or 1500 kg/m2)
For model “Steel”
100 kg (or 1000 kg/m2)
- The slats are installed flush with the floor, which does not prevent the movement of tool carts, spare parts, etc.
- The system is delivered fully assembled and can be installed in just 3 hours
- Availability of end position sensors
- Additionally, security sensors and lighting control can be installed
- Control buttons on the unit and remote buttons are illuminated
- The system allows you to completely or partially close the hole quickly and safely
- Drive power is 0.55 kW (default)
- Operating temperature — from -30ºC to +50ºC
- The maximum speed of extending slats is 9,2 m/min
«Pit Cover Wide Steel» (wide slat)
Protective structure for covering inspection ditches (pits and other technical openings)
Characteristics and description:
- The length of the protective covering is defined by the customer
- The width of covering is up to 1500 mm
- Minimum depth of the ditch (pit) is up to 1200 mm
- The maximum force of pushing out a slat is 100 kg (or 200 kg/ m2)
- Supply voltage is 220V, 380V or pneumatic drive
- Drive power is 0.7 kW (default)
- Operating temperature — from -30ºC to +50ºC
- The maximum speed of extending slats is 6,0 m/min
THE MAIN DIFFERENCES of model «PIT COVER WIDE STEEL» from model «PIT COVER»
Assembly options:
Manual drive
Electric drive
Pneumatic drive
Without a drive (lower cost, ease of assembly)
- The width of slats is 500 mm (depending on the depth of the pit)
- The material of slats is a corrugated sheet
- The length of the technical window is about 600 mm
- The drive on the front slat may obstruct the complete closure of the structure due to the stairs in the pit
- The coating on the sides has a small edge (about 40 mm), that is, the guides are slightly above the coating itself (it will be problematic to move the cart across the ditch)
«Pit Cover Light» (lightweight, portable)
Protective stretching curtains for covering instruction ditches (pits and other technical openings)
Characteristics and description:
- Width of protective curtain is from 600 to 1200 mm
- Length when unfolded is 1700 mm
- Length when folded is 550 mm
- It is possible to manufacture sections of different lengths
- The weight of one section is from 20 kg
- Endurance load is up to 150 kg per 1 m2
- They have 4 corkscrews on both sides
- The bearing elements are made of AD31T1 aluminum alloy
- If it is necessary to open fully the viewing ditch (slot), the protective curtains are completely removed from the guides of the pit (when folded) and can be moved to another place for storage
«Pit Cover Shield» (working load is up to 5T)
Protective shields for inspection ditches (pits and other technical openings)
Characteristics and description:
- The width of the shield is up to 1500 mm
- The length of the shield is up to 1500 mm
- It is possible to manufacture sections of different lengths
- The material of the shields is corrugated steel with rough edges
- Protective coating is powder, RAL color
- Sustained load is up to 5t (safe for passing vehicles with a load on one wheel up to 5t)
- Removal/installation is carried out ONLY with the help of a forklift or a crane beam through the rem bolts
We are looking for representatives in the regions